Decorative Joist Hangers - Contractor Talk
2011年1月8日 · Decorative Joist Hangers Jump to Latest 19K views 5 replies 6 participants last post by ChrWright Jan 9, 2011
Decorative Post & Beam Black Joist Hangers/Tee's/etc.
2013年7月12日 · Customer has a current cedar deck that is 16' x 32' one level close to the ground. He wants to build a 12' x 16' semi enclosure on one end with 6x6 Cedar Posts (10 total) and he wants the Beams on top done with 6x6 cedar also. What I'm having a hard time with is sourcing Black Decorative...
Joist Hangers On Band Joist | Contractor Talk - Professional ...
2014年3月28日 · Not much reason at all to hanger to the rim joist in that situation. Blocking between joists above the beam should handle any twisting issues. If the guard rail is fully supported by the rim joist, I would consider a "hold down" alternative to the hanger, like the Simpson HDU2 . That will keep your cantilevered rim tight to your joist.
Joist hangers, Good or Bad? - Contractor Talk
2008年3月19日 · Then 9 1/2" joists 16"oc would be adequate. Design restrictions require that I use joist hangers to fasten the joists to the beam. In the past I've always preferred to run joists on top of bearing walls and beams. My question is whether …
Hanging joist against 30 degree angle - Contractor Talk
2014年8月28日 · I have a gable end bay section where the joists have to be flush mounted on both sides to a rim and girder that run 30 degrees skewed from the joist. I know I can get 45 hangers, maybe 22.5, but what do you do when dealing with 30 degrees?
Deck Screws vs Joist Nails | Contractor Talk - Professional ...
2008年11月15日 · Simpson Strong-Ties LUS28Z face mounted joist hangers... According to their web-site, this hanger can really carry a good load, as long as it's installed properly. I've noticed that if the Hanger has an "S" in its name, it's a hanger in double shear and their web-site specifically says I cannot use 10d x 1-1/2" Joist nails.
Joist and hanger issues - Contractor Talk
2023年7月3日 · The reason we use double shear hangers is for lateral restraint as you walk the surface creeps. Either it's over spanned and flexing aware or the outer support is rotating away, this pulling. That's why I said you need to pull back to the house.
HELP! HELP! Joist Hangers - Contractor Talk
2006年5月26日 · and he noted a problem with the joist. The house is 30 years old. The buyers called an engineer and the engineer said they need about 25 joist hangers. This is in a crawl space, there is ok room to move. the floor joist are sitting on brick, and have been for 30 years. It seems sound to me, but the buyers want this done.
Joist hanging question | Contractor Talk - Professional …
2005年1月20日 · I have a question about attaching the hangers to the wall. The walls are already finished so I plan to add a "hanger board", basically 2x6 pieces, in place along the length of the wall, then attach the joist hangers to it. The "hanger board" will be nailed with atleast 2 nails into each stud (comes out to 2 nails per joist).
Attaching Deck Rim Boards and Floor Joist in tight space
2024年8月30日 · This might be overkill—maybe just using joist hangers would be enough. In this setup, the deck blocks would bear most of the weight, leaving the rim boards with minimal support responsibility. Another option (or an addition to this plan) could be attaching the rim boards to the surrounding structures.