Regarding the discretization of 3P3Z (bilinear transform, Tustin), it was found that the calculation of A2 in the document was not the same as in other literatures referred to by the customer. I also ...

Now we want to do our own custom board, we want to play AWRL1432 and AWR2944 chips on the same board, AWRL1432 (short range radar) for automatic parking, AWR2944(long range radar ) for AEB(Automatic ...

We have designed a UCC28064A board in interleaved mode, but our customer wants a single mode design on the same board. The question is similar to the previous forum attached. The answer is that ...

We are using the TMP119 for measuring the skin temperature on surface of the babies and patients. We request you to suggest some potting method or any user guide to make skin probe with tmp119. Since ...

I have collected data activating all 12 Tx and 16 Rx. I read all the bin files (master and slaves) using fread(fid, 'int16'). Total number of samples are correct as per the set parameters. Total ...

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

It seems both Windows (192kHz max?) and Linux (ALSA: 384kHz) have maximum hardware audio capture sampling rates below 768kHz. When a sound recording application like Audacity is asked to capture at ...

We are integrating TI's Jacinto (TDA4) and Sitara (AM26XX) MCAL. We have query regarding Cdd module name and file structures. For Jacinto (TDA) family the cdd modules are named as CddMODULENAME For ...

[C7x_1 ] 20.655168 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[s] c7x_2[P] c7x_3[P] c7x_4[P] Which looks like the cores have not crashed or hung.

We can't pull a video stream from the camera right now,We want to read the register to confirm the csirx status,Which register should we read? Can you provide a read instruction?

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

I have two different model development boards design by MYIR. I have two based on a 6254 (4 procs) and two based on 6252 (two procs). (so 4 total) They are identical otherwise. I have built my own ...