Regarding the discretization of 3P3Z (bilinear transform, Tustin), it was found that the calculation of A2 in the document was not the same as in other literatures referred to by the customer. I also ...

Now we want to do our own custom board, we want to play AWRL1432 and AWR2944 chips on the same board, AWRL1432 (short range radar) for automatic parking, AWR2944(long range radar ) for AEB(Automatic ...

We have designed a UCC28064A board in interleaved mode, but our customer wants a single mode design on the same board. The question is similar to the previous forum attached. The answer is that ...

We are using the TMP119 for measuring the skin temperature on surface of the babies and patients. We request you to suggest some potting method or any user guide to make skin probe with tmp119. Since ...

Other Parts Discussed in Thread: AWR2243, 我在官方AM2732+2*AWR2243两片级联的Demo中导入了以太网模块，使能了CPSW，添加了PHY驱动以及LWIP协议栈。目前通过.map文件看下来，添加以太网模块前后MSS_L2空间占用情况如下： 添加以太网模块前： ...

We have successfully interfaced the LDC5072-Q1 inductive position sensor with the metallic (Aluminium) target and as suggested by the In LDC5072_Sensor_Designer software, we followed the steps to get ...

I have collected data activating all 12 Tx and 16 Rx. I read all the bin files (master and slaves) using fread(fid, 'int16'). Total number of samples are correct as per the set parameters. Total ...

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

Any functional roll-off as you approach the 'max ambient' thresholds shown in Figs 8-5, 8-8, 8-11? In short, would we expect to see any reduction in efficiency, maximum available current draw, or any ...

It seems both Windows (192kHz max?) and Linux (ALSA: 384kHz) have maximum hardware audio capture sampling rates below 768kHz. When a sound recording application like Audacity is asked to capture at ...

We used CCS Theia 1.3.1 command line for automatically building projects. Now we update the CCS Theia to 1.5.1. But we find that build command will not return error ...

sdhci_send_command: MMC: 1 busy timeout increasing to: 200 ms. sdhci_send_command: MMC: 1 busy timeout increasing to: 400 ms. sdhci_send_command: MMC: 1 busy timeout ...